In the past, printing addresses on aqueous, varnished, and other press-applied coatings was only possible with an expensive "continuous flow" inkjet system. And while these systems were reliable, they were expensive to maintain and required a high skill level for operation. Over the last 10 years, Ink Cartridge technology has evolved to the point where they can print on many of these coatings, BUT the cost of the ink is quite high. And if your mailing jobs are in the 10's of thousands or 100's of thousands, the ink costs can add up in a hurry.
Buskro's 2500 Series Atlas technology now offers Cezanne Ink, which is a fast drying solvent without the hassles associated with previous systems. Benefits include:
What type of system uses the Cezanne Ink? Cezanne ink can be used with our new 2500 series Atlas printhead. Larger nozzles in this new printhead allow us to use fast drying ink without the danger of clogs or constant lines.....a common problem with older systems. This represents a continued evolution and improvement of our Atlas printing technology. As an added benefit, the system cost has also been reduced over previous version.
If you are currently using an older Atlas System, there are upgrades available for converting your system to the new 2500 series technology. And if you're thinking of adding another inkjet system to your line-up, you may find that the Atlas 2500 with Cezanne ink will pay for itself in consumables and drying ability.
An example: Many cartridge types cost $1.40/M or more in consumables. Aqueous compatible inks tend to be on the higher end of the spectrum. So for every 1 million addresses, you are spending an additional $1,000 in ink alone! And it's very likely that you are running your equipment slower to allow dry time, driving up your cost of labor. Cezanne ink allows you to run with much lower ink costs, higher speeds, and better quality. Feel free to call anytime for more information: 800-398-5786. Or visit our website!
This post has 35 feedbacks awaiting moderation...